Jeanneau MERRY FISHER 815 Owner's Manual - page 85
81/104
ELECTRONIC
ELECTRONIC - LAYOUT OF COMPONENTS
LEAD LINES LOCH SPEEDO SOUNDER
LEAD LINES
The loch and depth sounder transducers are located in the engine compartment (Port
side). Keep the log sensor cowl close to the instrument so as to be able to intervene in
complete safety.
Do not store material on top of the sensors.
AUTO PILOT
The pilot consists of several elements listed as follows:
- Repeater in the cockpit starboard side above the engine panel.
- Compass and pilot calculator fixed to the starboard saloon aft partition.
- To supply power to all elements switch on the "Navigation" circuit breaker on the
electrical panel.
- For use and maintenance of the material consult the manufacturer instructions.
MAINTENANCE
Clean the transducer probe during each dry dock and the log sensor regularly. Read the
instructions for maintenance recommendations.
Refer to chapter 12 "Launching" for the precautions to be taken concerning the sensors
during hoisting.
View interior
View Outside
ADVICE - RECOMMENDATION
- For optimal operation remove all metal objects from its close proximity.
- Do not store material close to the calculator and electrical connections.
8
E
L
E
C
T
R
IC
A
L
E
Q
U
IP
M
E
N
T