Jeep WRANGLER 2017 Quick Reference Manual - page 10
Axle Lock (Tru-Lok) — Rubicon Models
The AXLE LOCK switch is located on the instru-
ment panel (to the left of the steering column).
This feature will only activate when the follow-
ing conditions are met:
• Key in ignition, vehicle in 4L (Low) range.
• Vehicle speed should be 10 mph (16 km/h)
or less.
To activate the system, push the bottom of the
AXLE LOCK switch once to lock the rear axle
only (the “Rear Axle Lock Indicator Light” will
illuminate), and push the bottom of the switch
again to lock the front axle (the “Front Axle
Lock Indicator Light” will illuminate). When the
rear axle is locked, pushing the bottom of the
switch again will lock or unlock the front axle.
NOTE:
The indicator lights will flash until the axles are
fully locked or unlocked.
To unlock the axles, push the top of the AXLE
LOCK switch.
Axle lock will disengage if the vehicle is taken
out of 4L (Low) range, or the ignition switch is
turned to the OFF position.
AXLE LOCK Switch