1. DL manuals
  2. JEM
  3. Fog Machine
  4. Glaciator X-Stream
  5. User Manual

JEM Glaciator X-Stream User Manual

Summary of Glaciator X-Stream

  • Page 1

    Martin professional a/s,olof palmes allé 18, dk-8200,aarhus n phone: +45 87 40 00 00 internet: www.Martin.Dk heavy fog glaciator x-stream user guide version 1.0

  • Page 2

    Fluids suitable for this system: heavy fog fluid b2 heavy fog fluid c3 heavy fog glaciator note! The warranty on this machine is conditional on the use of genuine jem / martin fluid only. Other fluids may represent a health hazard when used in this machine, and may damage the internal components. Co...

  • Page 3

    Specification heat exchanger fluid system control panel refrigeration unit output connection 3.5kw heater (@240v) wide bore steel vaporizing coil ceramic thermal trip for over-temperature protection electronic temperature control using thermocouple oscillating piston high pressure fluid pump low flu...

  • Page 4

    Introduction the heavy fog glaciator x-stream is the latest product in the new generation range of jem professional machines. Designed for touring and installation in a variety of applications, it has provision for easy integration into most common control systems currently used in the entertainment...

  • Page 5

    Heavy fog glaciator user guide 18 display messages the following list shows the messages possible, and the context under which they are displayed. Only the messages available under normal operation are shown. Messages shown when using the menus, are detailed in other sections of this handbook. Fog d...

  • Page 6

    Heavy fog glaciator user guide 4 machine layout condenser air inlet (with filter) control panel power switch power inlet air inlet external fluid inlet drip tray internal fluid compartment (with local / remote selection switch) heavy fog glaciator user guide 17 interface options for glaciator x-stre...

  • Page 7

    Heavy fog glaciator user guide 16 basic operation the following instructions explain how to operate the basic functions of the machine. It is assumed that the machine is being started from cold. Starting with all the control panel switches off, and the display showing ‘off’, go through the following...

  • Page 8

    Dmx operation the machine may be operated using the industry standard dmx 512 digital control protocol. This allows the control of the fog system to be easily integrated with the lighting system in most installations. Dmx may be used without changing any of the settings on the main control panel. Wh...

  • Page 9

    Control panel funtions heavy fog glaciator user guide 14 1 1 1 1 0 0 0 0 fog standby timer ice the control panel provides a means to enable the various functions that control the fog and ice operation. The switches have a maintained action, and are used to set the operating mode of the machine. The ...

  • Page 10

    Heavy fog glaciator user guide 8 the display two led displays are used in the heavy fog glaciator to show status and control information. The left display shows all information for the fog generation functions of the machine, whilst the right display shows the information for the ice functions. Loca...

  • Page 11

    Heavy fog glaciator refrigeration system control the performance of the refrigeration system in the heavy fog glaciator is the key to its heavy fog generating capability. The system is under the complete control of the main microprocessor which also co-ordinates all the other activities within the m...

  • Page 12

    Heavy fog glaciator the fluid system the heavy fog glaciator uses a 5l (1.3 us gal.) container to give approximately 1.5 hours of continuous operation at full output. This will vary with power supply voltage, which will determine the maximum continuous output level. For longer run times, the remote ...