K-sun BEE3-EZ Operator's Manual - Batteries
8
Batteries
The BEE3®-EZ and BEE3®-EZ+ uses 6 AA alkaline batteries. Do not use other types of AA
batteries with the printer. Follow Warnings and Cautions found on p. 23 regarding the use
of batteries with the printer.
NOTE: Printing long labels, wider tape may cause the device to display “CHANGE BATTERIES”
even if new batteries are installed. This is normal. New AA alkaline batteries will supply enough
power for the device to print one tape cartridge at room temperature. However, operating the
printer in colder temperatures will shorten the life span of the batteries.
Dispose of used batteries according to your local regulation.
Do not store your printer for long periods of time with batteries. Remove the batteries from
the device to avoid possible leakage.
If you have stored files, change batteries within four minutes or you may lose text data
or settings.
Remove the battery cover using the release tab.
Insert 6 AA alkaline batteries with the correct
polarity as shown.
Close the battery cover. Adjust the two tabs to the
holes of the main unit and close the battery cover
firmly until it clicks.
Ba
tt