K-sun BEE3-EZ Operator's Manual - Cable/flag

9

Cable/Flag

Press Shift                + Cable/Flag Key

Screen shows Cable.

Arrow Down for Flag Vertical. (Flag:Vert)

Arrow Down for Flag Horizontal. (Flag: Hori)

Cable 

   Example: 

1.  Set Length 2.0” through 5.0” or OFF.

2.  Length is the full length of the label. Base the length on the circumference of object you 

are placing the label on. Up to four lines of text are available.  

3.  Enter up to 4 lines with 4 numbers or letters. See Double Figure p. 28 for entering up to 

8 digits.

4.  Enter up to 4 lines. Print.

Flag 

Vertical 

  Example:

1.  Set Length 1.0” to 5.0” or OFF.

2.  Length is the full length of the label. A line will print in half to help guide in placing label 

for flagging. Base the length on the circumference of wire plus length of flag needed to 

extend past wire.  

3.  Enter up to 4 numbers or letters per line. See Double Figure p. 28 for entering up to 

8 digits.

4.  Enter up to 2 lines. Text will automatically repeat on second section of label.

Flag 

Horizontal 

  Example:

1.  Set Length 2.0” to 5.0” or OFF.

2.  Length is the full length of the label. A line will print in half to help guide in placing label 

for flagging. Base the length on the circumference of wire plus length of flag needed to 

extend past wire.  

3.  Enter up to 4 numbers or letters per line. See Double Figure p. 28 for entering up 

to 8 digits.

4.  Enter up to 4 lines. Text will automatically repeat on second section of label.

5.  Approximately 40 characters/numbers can be entered and will then be repeated on 

second section of label.

Note: To delete “all” when using Cable and Flag features continue to press the backspace key 

through the menu and back to line 1.

Note:   You cannot save Cable/Flag labels using the File function.

1234

1234

1234

1234

Cable/F

lag

Shift

Cable/Flag