K-Team Khepera III User Manual - page 13
of
43
3.1.7
How to plug a KoreBotLE
The Khepera III has been designed to work together with a KoreBotLE,
but as it isn’t mandatory, in the default pack there is no KoreBotLE with
the robot. You can buy it at the same time, in this case, the KoreBotLE
will be mounted into the robot. But if you buy it afterward, you must first
unmount the upper body of the Khepera III, then plug the KoreBotLE on
the extansion connectors (see figure 3.5). If you have any other extansion
(KoreIO, KoreSound, KoreVision, etc...), you must only remove the black
metal plate, and plug your extension on the KoreBotLE.
Figure 3.5: Details of the KoreBotLE assembly.
Khepera III manual ver 2.2
11