1. DL manuals
  2. Kaffee Konzepte
  3. Coffee Maker
  4. FK-series
  5. User Manual

Kaffee Konzepte FK-series User Manual

Manual is about: Coffee Dispensers

Summary of FK-series

  • Page 1

    Fk range - coffee dispensers - 1 - fk range coffee dispensers set up and user guide fk-series.

  • Page 2

    Fk range - coffee dispensers - 2 - notice every effort has been made to ensure that the information contained in this manual is up to date and correct. However, the author, publisher or manufacturer will not accept liability for any loss or damage caused resulting from any errors in or omissions fro...

  • Page 3

    Fk range - coffee dispensers - 3 - index of contents using the dispenser .........................................................................................4 quick start ....................................................................................................4 refilling coffee conce...

  • Page 4: Using The Dispenser

    Fk range - coffee dispensers - 4 - using the dispenser quick start remove the dispenser from the carton and place on a stable worktop capable of supporting a minimum of 50kg/m. (80kg/m for a-fk) connect the dispenser to a source of potable water at a pressure between 0.5bar minimum to 10bar maximum....

  • Page 5: Cleaning The Dispenser

    Fk range - coffee dispensers - 5 - • for a can: defrost the can fully and give it a shake to stir up the coffee solids. Open the ring pull and insert the suction tube into the can. • for a bib: defrost the bib fully and give it a shake to stir up the coffee solids. Firmly attach the suction tube con...

  • Page 6

    Fk range - coffee dispensers - 6 - 6. Remove the cleaning bottles and/or the cleaning adapters. 7. When the cleaning function is completed the lights will cease blinking and remain on. The cleaning cycle must be fully completed before the blinking will stop. Basic manual flush of valves and mixers t...

  • Page 7

    Fk range - coffee dispensers - 7 - setup mode press button to step to next option. Setup mode enables the selection buttons to be enabled or disabled and allocates recipes to each button. It also provides the ability to modify a recipe to suit the user. 1. Press the selection button to be modified 2...

  • Page 8

    Fk range - coffee dispensers - 8 - recipe bank display shows:- recipe bank enter selects press button to step to next option or press button to enter the recipe bank. The dispenser contains a bank of pre-programmed drinks that may be allocated to any selection button (only fk12). This enables the ab...

  • Page 9

    Fk range - coffee dispensers - 9 - display shows:- press selection 1. Press the selection button of the drink you wish to adjust. Display shows:- selection xx volume (+/- =y) (xx = number from 1 to 12) (y = number from -30 to +30, these numbers represent 1/10th second of dispense time) 2. Use or but...

  • Page 10: Engineer Mode Functions:

    Fk range - coffee dispensers - 10 - engineer mode functions: hold down the ‘stop’ button then press and release the (enter) button after 1 second but continue to press the ‘stop’ button for a further 5 seconds to enter the engineer mode functions:- display shows:- engineer setup enter selects press ...

  • Page 11

    Fk range - coffee dispensers - 11 - use or buttons to adjust the heating program to the number of elements being used, 1 element = 230vac 13a, 1 phase, normal schuko plug setting. 2 elements = 230vac 30a 1 phase or 30a, 2 live wire 3 phase 3 elements = 45a 1 phase or standard 3 phase, normal 3 phase...

  • Page 12

    Fk range - coffee dispensers - 12 - fk20 2 products - dispenser using 2 liquid coffee cans or bibs of different coffee types. Fk20 1 product - dispenser using 2 liquid coffee cans or bibs of the same coffee type. Use or buttons to select this function type calibrating concentrate pumps this function...

  • Page 13

    Fk range - coffee dispensers - 13 - concentrate sensors this function enables or disables the liquid coffee sensor/s press button display shows:- product sensors enabled / disabled use or buttons to select sensor operation boiler temperature calibration this function is used to calibrate the tempera...

  • Page 14

    Fk range - coffee dispensers - 14 - lighting setting this function enables brightness adjustment of the front panel illumination. Press button display shows:- set led level xxx use or buttons to adjust the brightness of the front panel lights x = numbers 0 to 255, setting 255 =lamps off and 0 = lamp...

  • Page 15

    Fk range - coffee dispensers - 15 - coffee detect cs=xxx dp=xxx cs = the value read by the coffee sensor, (only shown for reference). Dp = the value set by the system as the trip point at which the machine decides that coffee is present or not and is only shown for reference. When the calibration is...

  • Page 16

    Fk range - coffee dispensers - 16 - firmware version this shows the version of the firmware installed in the processor and the date it was compiled. Display shows:- firmware v: vx.X.X comp dd-mmm-yy eeprom software version this shows the version of the software installed in the eeprom display shows:...

  • Page 17: Fig.1 Pcb Layout

    Fk range - coffee dispensers - 17 - fig.1 pcb layout.

  • Page 18: General Specifications

    Fk range - coffee dispensers - 18 - general specifications length 55cm width 32cm height 70cm (when fitted with 100mm legs) weight empty 28kg (typical) weight operational 40kg (typical) construction stainless steel with brushed finish flow rate up to:- 6 litres per minute (typical) boiler capacity:-...

  • Page 19

    Fk range - coffee dispensers - 19 - notes.

  • Page 20

    Fk range - coffee dispensers - 20 - kaffee-konzepte gmbh & co.Kg rudolf-diesel-strasse 2 23611 bad schwartau germany office telephone number: - +49 (0) 451 384 5399 fax number: - +49 (0) 451 384 5388 service department telephone number (english): - +49 (0) 451 300 3772 hours: - 9 a.M. To 5 p.M. Emai...