Kaffee Konzepte FK-series User Manual - page 6
FK Range - Coffee dispensers
- 6 -
6. Remove the cleaning bottles and/or the cleaning adapters.
7. When the cleaning function is completed the lights will cease blinking and
remain on. The cleaning cycle must be fully completed before the blinking will
stop.
Basic manual flush of valves and mixers
To flush out the valves and mixers press and hold the ‘FLUSH’ button for a minimum
of five seconds.
On demand flush cycle
To start a full cleaning cycle at any time, press and hold the (enter) button and
press the ‘FLUSH’ button twice
.
Pressing the ‘STOP’ button will terminate this
cleaning cycle. This does not affect the next timed cleaning cycle
General cleaning
Wipe down the dispenser with a clean damp cloth using hot water with a mild
detergent added to remove splash marks etc. Do not use abrasive cleaning
materials, or solvents.
Dispenser user functions (Set-up mode):
Hold down the ‘STOP’ button and then press the (enter) button for 1 second, then
release the ‘STOP’ button to enter the user functions (Set-up mode):-
Dispense counters
Display shows:-
Counters
Enter selects
Press button to step to next option or press button to view Counters.
Display shows:-
Counter. Push sel
1. Press any selection button to show how many drinks have been dispensed by
that button.
2. Press button to exit to menu.
3. Press ‘STOP’ to go back to normal operation