Kaiser Baas GAMMA User Manual - Drone Trimming

EN

GAMMADRONE | User Guide

17

DRONE TRIMMING

Control of the Drone can be trimmed using the trim buttons on the Transmitter. If the Drone 

is drifting off during a hover or other flight maneuver, these buttons are used to counter 

this drift.

To reset all trimming, simply land the Drone and re-calibrate.

PRE-FLIGHT CHECKLIST

•  Do a 

COMPLETE  check  of  your  surroundings;  look  for  hazards  above,  in  front  and 

behind you.

•  Be especially aware of things like power lines and nearby people and animals. If these 

hazards exist, 

DO NOT deploy your Drone and consider a new Take-off Location.

•  DO NOT FLY in inclement weather or moderate to high winds.

•  DO NOT FLY in populated areas as unforeseen flight hazards may occur.

•  Remember YOU are the Pilot. Safety is YOUR responsibility.

•  DO NOT FLY near airports/controlled airspace. Ensure that you are at least 5.5kms 

from any airfield and you are adhering to any regulations and laws laid out by your 

local  aviation  authority.  Remember  checking  your  distance  to  these  areas  is 

YOUR 

responsibility

•  Never fly your Drone near large crowds or above unwilling spectators.

•  Make  sure  that  you  have  the  full  permission  of  people  within  flying  range  of  your 

Gamma Drone and 

DO NOT fly your Drone where people have not given permission or 

have requested that you not fly.

•  Ensure the Drone is orientated in the desired direction.