Kaiser Baas GAMMA User Manual - Take-Off and Landing Basics

EN

GAMMADRONE | User Guide

19

TAKE-OFF AND LANDING BASICS

To Take-Off you must first bind the Drone to your Transmitter.

Refer to the Drone/Transmitter Binding Section.

The Gamma Drone comes equipped with a Take-Off and Landing function.

To Take-Off:

Press the Take-Off/Landing Button to arm the Drone. The Rotor Blades will start to spin 

indicating it is ready to fly. Push the Throttle/Yaw Left Stick slightly UP to fly.

The Gamma Drone features Auto-Hover, releasing the Throttle/Yaw stick will keep the 

drone at the same altitude. Pushing the Throttle/Yaw Left Stick UP or DOWN will ascend 

or descend the Drone respectively. 

To Land:

Whilst the Drone is in flight press the Take-Off/Landing button. The Drone will then 

descend to the same altitude/level from which you armed it.

To Emergency Stop:

In an emergency in which you need to stop the Drone motors immediately, HOLD the 

Take-Off/Landing Button for 3 seconds to kill the motors completely.