Kaiser Baas X-BEAM Complete User Manual - page 8
13
14
To maintain your X-Beam Action Camera
Light, it is recommended that you clean
the light and waterproof seal after every
use. The waterproof seal, located on the
door, can be cleaned by gently wiping
away any dirt, dust or debris with a
clean, dry and soft cloth.
Ensure the seal is clean to maintain
the seals integrity. If the seal becomes
damaged or lost, please replace with
the included spare part. Always check
the seal for any dirt, dust or debris
prior to use.
Waterproof Seal Care
PRODUCT SPECIFICATIONS
Number of LED’s
6
Type of LED’s
XT-E CREE
Colour Temperature
5000K
Light Modes
3
Mode
Wide
Ambient
Target
Lumens
1000/500
700/350
300/150
Battery
0.5/1 hr
0.75/1.5 hr
1.5/3.5 hr
LED
6
4
2
Angle
45°
70°
35°
Battery
3.7VDC 2200mAh 8.14Wh Li-Ion
Charge Time
3 Hours with 5V 2.1A USB Adaptor
Waterproof
40m IP68
Dimensions
70x77x42 mm
Weight
215g
Note: After use in salt water, rinse
the X-Beam Action Camera Light in
fresh water to prevent corrosion.