Kalenji CW Kalenji 700 GPS User Manual - page 25
List of available indicators
7
Altitude: distance above sea level.
8
Cumul +:cumulative altitude gain (to an accuracy of +/- 50 metres)
- Total: from start of session.
- Lap: from the start of lap.
9
Cumul -: cumulative altitude loss (to an accuracy of +/- 50 metres)
- Total: from start of session.
- Lap: from the start of lap.
10
Speed of ascent: speed of ascent (climb) in metres per hour
- Instantaneous: instant speed of ascent.
- Average: average speed of ascent during session or lap.
11
Speed of descent: speed of descent (downwards) in metres per hour
- Instantaneous: instant speed of ascent.
- Average: average speed of ascent during session or lap.
12
Heart rate: heart rate in beats per minute (CW 700 Kalenji GPS only)
- Instantaneous: Instant heart rate.
- Average: average heart rate during session or lap.
- Maximum: highest heart rate during session or lap.
- Minimum: lowest heart rate during session or lap.
13
Percentage of max HR: heart rate as a percentage of maximum heart rate (max MR) (CW 700 Kalenji GPS only)
- Instantaneous: percentage of instant max HR.
- Average: average heart rate during session or lap as percentage of max HR.
- Maximum: highest heart rate during session or lap as percentage of max HR.
- Minimum: lowest heart rate during session or lap as percentage of max HR.
14
Calories: energy expenditure in kilo calories burned
- Beginning: from start of session.
- Lap: from start of lap.
The watch is only able to accurately calculate the rate of calories expended when running.
15
Calories/hour: rate of energy expended in kilo calories burnt per hour
- Instantaneous: instant rate of energy expended.
- Average: average rate of energy expended during session or lap.
- Maximum: highest rate of energy expended during session or lap.
The watch is only able to accurately calculate the rate of calories expended when running.
16 2 2 Fast Touch (CW Kalenji 700 GPS only)
The Fast Touch function is only available on the CW Kalenji 700 GPS.
Fast touch
This function means that a mere tap on the watch’s screen can launch a function.
This is quicker and more ergonomic than pressing the relevant function key.
You can set the function that you wish to link to Fast Touch and also the level of sensitivity. Select one of the 2 parameters and click
OK
to change.
16 2 2 1 Fast Touch functions
Your Fast touch may be set to off (it is deactivated) or to one of 4 available functions:
- Take a manual lap.
- Changing display: my indicators => my rhythm => my session => my route. See sections relating to the different modes, namely free session, training,
challenge, and indoor to find out about available displays for each mode.
- Page down in my indicators (section
9.3.2. My indicators display
).
- Switching on backlight.
The activation of fast touch, with any of the 4 functions below, does not deactivate the keys specific to these functions.
16 2 2 2 Fast Touch sensitivity
Fast touch can be set to different levels of sensitivity from fluid to hard.
Fluid touch: A light, clean tap is sufficient to start function.
Hard touch: A more forceful tap is required to start function.
Irrespective of the level of sensitivity selected, the tap should be clean. You are advised to tap the screen with the tip of your fingers rather than
the pad of your finger. Fast Touch is set to respond to a light, clean touch rather than a hard, slow touch.
16 2 3 Beeps
key press
pop-up alerts
on
on
In this menu you can activate or deactivate the beep (sound alert) for press key function as well as the pop up display beep.
The beep is activated with On and deactivated with Off.
function
OFF
“fast touch”
is disactivated
sensitivity
medium
“
touch
”
25