1. DL manuals
  2. Kaltis
  3. Freezer
  4. ULTRA LOW TEMPERATURE FREEZER
  5. User Manual

Kaltis ULTRA LOW TEMPERATURE FREEZER User Manual

Other manuals for ULTRA LOW TEMPERATURE FREEZER: User Manual
Manual is about: ULTRA LOW TEMPERATURE FREEZER

Summary of ULTRA LOW TEMPERATURE FREEZER

  • Page 1

    Ultra low temperature freezer user manual 1.

  • Page 2: _______

    _______ __________________________________ note：kaltis° reserves the right to modify any parts of this manual without prior notice. 1. No part of this manual may be reproduced in any form, or translated into other languages, without the expressed written permission of kaltis®. 2. Contact kaltis® if ...

  • Page 3: Kaltis®

    Kaltis® … the future has a name! Thank you for choosing kaltis®. You have purchased one of the finest, state of the art ultra low freezers available. Kaltis® is a manufacturer of refrigeration products, with a 25 year track record of product excellence. We specialize in a range of state of the art, ...

  • Page 4: 1. Safety Precautions

    1. Safety precautions it is imperative that users comply with this manual as it contains important safety advice. Items and procedures are described so that you can use this product correctly and safely. Following these precautions will prevent possible injury to users. Precautions are illustrated i...

  • Page 5: Warning

    Warning z use this product only in the way described in the product literature and the manual. Before using the product, verify that this product is suitable for its intended use. Z do not modify system components. Before use, confirm that the product has not been altered in any way. Z your unit mus...

  • Page 6: Caution

    Caution z connect the unit to a power source as printed on the data plate located on the lower right side of the unit. Use of any other voltage or frequency other than that on the rating label may caus damage to the unit, fire or electric shock. Z when removing the plug from the power supply outlet,...

  • Page 7: 2. Usage Precautions

    2. Usage precautions 1. Do not defrost the inside walls with a knife or any sharp object.. The cooling pipes run behind the cabinet walls. Be careful not to damage the pipes because this could cause breakdown. Do not make holes in the cabinet walls to installation attachments. 2. Frost will accumula...

  • Page 8: 3. General Recommendations

    3. General recommendations the refrigeration system is designed to maintain ultra-low temperatures with safety in a +32 o c ambient environments, only when the freezer is used for its intended purpose ( storage). Caution! This unit is not a “rapid-freeze” device. Freezing large quantities or liquid,...

  • Page 9: 4. Pre-Installation

    4. Pre-installation on delivery, unpack the unit and check the cabinet exterior for signs of damage. Caution! Do not discard the internal lids from chest-style units. These lids are necessary to maintain the correct temperature, moisture control, and general operational efficiency. 5. Installation d...

  • Page 10

    Warning! Do not use outdoors. Current leakage or electric shock may result if the unit is exposed to water. Never install the unit in an excessively humid environment. Or where there is a high risk of being splashed. By water. Deterioration of the insulation may result which could cause current leak...

  • Page 11

    5.3 leveling the unit must be level: both front to back and side to side. To level chest models, leave the casters in place and shim the wheel(s) with strips of sheet metal cut wider than the caster. Upright models have adjustable leveling feet located adjacent to the front casters. Extend the level...

  • Page 12: 6. Operation

    6. Operation 6.1 prime series control panel: features figure 1. Prime series control panel with optional backup system before using the freezer, familiarize yourself with the freezer controls. 6.1.1 control keys 6.1.1.1 on /off press to start or stop the unit. The indicator lights when the freezer i...

  • Page 13

    6.1.1.5 temperature increment and decrement use these keys to increase or decrease the temperature value. 6.1.1.6 enter/ escape after entering the password, press the key to return to setting mode. After setting, press to return to monitoring mode. 6.1.2 indicators 6.1.2.1 operation indicator the in...

  • Page 14

    6.1.2.10 fuse indicator the indicator lights when the surge protector on the main electric panel has blown due to a power surge. 6.1.2.11 voltage failure indicator the indicator lights when the incoming line voltage is above or below the voltage regulator operating range. 6.1.2.12 alarm battery low ...

  • Page 15

    6.2 merit series control panel: features figure 2. Merit series control panel with optional backup system before using the freezer, familiarize yourself with the freezer controls. 6.2.1 control keys 6.2.1.1 on /off press to start or stop the unit. The indicator lights when the freezer is in “on “. P...

  • Page 16

    6.2.1.5 temperature increment and decrement use these keys to increase or decrease the temperature value. 6.2.1.6 enter/ escape after entering the password press the key to return to setting mode. After setting, press to return to monitoring mode. 6.2.2 indicators 6.2.2.1 operation indicator the ind...

  • Page 17

    6.3 start up refer to section 6.1 and to figure 1 for the following procedures. 6.3.1 turning the power on 1. Plug the freezer to the power outlet. The control panel screen displays lights up. 2. Press , and enter the password ( sequentially press: ). Then press , and the operation indicator lights ...

  • Page 18

    6.3.5 alarm test caution! If the warm alarm set point exceeds than 10°c warmer than the operating temperature set point, we do not suggest you test the alarm as detailed below. 1. Press and hold . The temperature display shows the temperature rising. When the temperature reaches the warm alarm set v...

  • Page 19: 7. Maintenance

    7. Maintenance warning! To prevent electric shock and possibly injury, always disconnect the power supply to the unit prior to any repair or maintenance. Do not to inhale or consume medication or aerosols around the unit during maintenance. This may harmful to your health. Caution! During maintenanc...

  • Page 20

    7.2 gasket maintenance periodically check the door or lid gasket for punctures or tears. Leaks are visible as aa streak of frost which forms at the point of gasket failure. Make sure that the cabinet is level (refer to section5.3 for leveling information). 7.3 defrosting to defrost the freezer: 1. E...

  • Page 21: 8. Troubleshooting

    8. Troubleshooting caution! Repairs should only be performed by trained personnel. If the unit malfunctions, before calling service, check the following. The chamber does not cool: 1. Check the power supply and circuit breaker. 2. The voltage is too low. (should this be the case, call an electrician...

  • Page 22

    Yourself with the freezer controls. 22.