Kalvis K-2-16 User's Installation And Operation Manual - page 6
- 6 -
- 19 -
KALVIS-2-16, 2-25, 2-30, 2-40 en 2009.05.18
*
If boiler is connected to the chimney by metal pipes, pipes should be not
thinner than 1,5mm and they have to be covered by thermal insulation
Attention !
When chimney’s draught is too great and sawdust is used for fuel sparks
may fly out through the chimney.
It is prohibited to use sawdust for fuel, if the distance between chimney
and flammable roof or other flammable structures is less than 20 m.
4.2. Requirements for chimney
Chimney design and boiler connections into it are shown on the
fig 2 and 3.
Boiler sold:
Company
Sales date:
Address
Phone
Boiler
mounted:
Company
Address
Phone
Foreman
(name, last name, signature)
In case of a
breakdown
contact
Company
Address
Phone
Manufacturer
UAB “Šiauli
ų
tauro kalvis”
Pramon
ė
s 15,
LT-78137 Šiauliai, Lithuania
Phone: (+370 41) 540556
E-mail: info@kalvis.lt
•
Chimney draught is not less than specified in main technical data
table;
•
Chimney hole‘s cross section should be not less than
120x270 mm;
•
Boiler needs a separate hole for the chimney connection. No other
connections through that hole are allowed
2 fig.
3 fig.