KAM KCD3000 USB Instruction Manual - page 3
Description of functions
Control unit
1. OPEN/CLOSE: It opens and closes the CD tray.
2. JOG WHEEL: Use the jog wheel to adjust the speed to match with the other playing track. It is also used for the SEARCH and
SCRATCH functions.
3. CD/USB: Press to switch the play source between USB and CD.
* It only works only when the playback is paused. Press track skip button to switch the playing source between CD, USB 1 and
USB 2. Then press CD/USB button again to confirm your selection. When playing from only one USB source it is possible to load
track to deck A and deck B from the one USB source
4. SCRATCH: To activate Scratch function.
5. TIME: This button switches the display between remaining time, elapsed playing time, and total remaining time.
6. CONTINUE/SINGLE
CONTINUE: The unit continues to play the tracks until the end. When changing to the next track manually or automatically, the
main cue will also renew to the new track.
SINGLE: The unit plays a single track only. When the current track ends, it changes to the next track but stops and returns to the
main cue of the new track.
7. MEMO/AUTO: Press it for memorizing Hot Cue or activating Auto Loop.
8. Hot Cue: This unit will allow you to play from 2 cue points instantly. This can be set while playing the track or in pause mode
using the jog wheel.
To set CUE memory: Press MEMO first and then the desired CUE button. The CUE button will flash and when the CUE button
stays on the cue point is set. Pressing the cue button at any time will start the track for the set cue point, setting more cue points
will allow you to jump between the set cue points instantly.
9. DISPLAY: The display is used to see which functions are playing and selected.
10. FOLDER: Press this button to switch between MP3 folder and MP3 file. Select a folder by pressing this button again.
*In MP3 File mode, Total-Track shows the total MP3 files in the folder.
*In MP3 Folder mode, Total-Track shows the total folders in the CD or in the USB storage device.
*When you use a hard drive as your USB play source, holding this button down for 2 seconds will jump to partitions.