KAM KCD3000 USB Instruction Manual - page 5
Main unit
1. DISC TRAY: It’s for placing a disc on the tray.
2. OPEN/CLOSE: Press to load or eject the disc. Each press will open or close the disc tray.
3. USB Port A & B: Connect a USB storage device to load audio files. It supports MP3 files format only.
USB A: When playing the audio file from USB A, the USB text will illuminate stably on the display.
USB B: When playing the audio file from USB B, the USB text will flash on the display.
The maximum current of each USB port provides 500mA only.
If you connect a hard drive which needs the current more than 500mA, using a duo USB connector cable to connect two USB
ports to get the sufficient power supply.
If you connect a hard drive which needs the current more than 1A, please get the power from external power supply.
4. POWER ON/OFF: This function turns the unit on and pressing the button again turns the unit off.
5. LINE OUT: The audio from each CD player outputs from these jacks. Connect to the line input of a mixer.
6. FADER START: This connector is used for connecting to FADERSTART wire remote control unit.
7. TACT-LOCK option: Select the type of switch in the mixer for FADERSTART wire remote control.
8. CONNECTION PORTS: Connect from this port to the control unit.
The port has to be connected correctly to its relative port and both ports (A&B) have to be connected to activate all functions.