Kane KANE504 Owner's Manual & Maintenance Manual - 6.2 Fuels
- 13 -
6.2 FUELS
AVAILABLE
Selector Position
Display
Type
L Oil
LOIL
Light Oil
Propane PrOP
Propane
Nat Gas
nGAS
Natural Gas
H Oil
HOIL
Heavy Oil
Wood wOOd Wood
Coal COAL
Coal
7. CLEANING
This product can be cleaned using a damp lint free cloth and a small
amount of non-abrasive detergent. Take care to avoid moisture entering
the sensor’s grill and after cleaning leave the product in a warm dry place
to allow any surface dampness to evaporate. Under no circumstance
should any solvent cleaner be used as this may cause damage to the
plastic case, display and sensor.
8.
ANNUAL RECALIBRATION AND SERVICE
Although sensor life is typically more than five years, the monitor should
be re-calibrated and serviced annually to stop any long-term sensor or
electronics drift or accidental damage.
Local regulations may require more frequent re-calibration.
In the UK Kane International has service facilities at Atherton near
Manchester (Tel: 01942-873434), the primary service centre for UK
customers and at Welwyn Garden City in Hertfordshire (Tel: 01707-
375550), the primary service centre for non-UK customers.
By sending your monitor back to Kane for an annual fixed price service
(check www.kane.co.uk for details) you have the opportunity to extend
the warranty on your analyser to 5 years.