Kanguru FC-RW User Manual - page 15
KanguruFCRW
Driver Installation
Depending on your operating system, you may need to install drivers before
using your FCRW as an external USB2.0 CD-R/RW burner or card reader. Card
reader drivers are required for Win98/98SE, 2000, and XP. CDRW drivers are
only required for Win98/98SE.
1. Insert the Kanguru Drivers and Manuals mini CD included with this device.
2. Open the” KanguruFCRW” folder and open the “Drivers” folder.
3. Double-click on the “Setup.exe” file to begin the installation.
4. Please follow the installation wizard according to your operating system.
5. After the installation wizard has finished you may need to restart your PC
if prompted.
External CDRW
1. Install the drivers if they are required for your operating system.
2. Connect the power cable to the back of the device.
3. Press and hold the power button for 2 seconds to turn on the device.
4. Connect the included USB2.0 cable to the FCRW and then to your PC.
5. Your system should find the new hardware automatically.
6. You should now find a new CD-RW drive available under “My Computer”.
If you are using Mac OS X, you will not see a drive icon until a CD is
inserted in the FCRW.
7. To begin burning CDs, you must install a burner software such as the
Nero bundled with this device.
External Card Reader
1. Install the drivers if they are required for your operating system.
2. Connect the power cable to the back of the device.
3. Press and hold the power button for 2 seconds to turn on the device.
4. Connect the included USB2.0 cable to the FCRW and then to your PC.
5. Your system should find the new hardware automatically.
6. You should now find 3 “Removable Disk” drives available under “My
Computer”. If you are using Mac OS X, you will not see these drives until a
flash card is inserted in the FCRW.
- 15 -