Kanguru FC-RW User Manual - Operation—Stand-Alone
KanguruFCRW
3.
Operation—Stand-Alone
Basic Operation Mode
1. Connect the power cable to the back of the device.
2. Press and hold the power button for 2 seconds to turn on the device.
3. Insert a flash card into the appropriate card reader slot.
4. Press the “Open” button to release the cover and insert a blank CD-R/RW.
5. Close the cover and press the “Play/REC” button to begin duplicating your
flash card.
6. A short beep will indicate the duplication is complete.
7. The unit will display the % of storage left on the CD.
8. Press the “Open” button to release the CD.
Note1: Keep the Kanguru FCRW on a flat surface during operation. Do not
tilt or pickup the device as it may cause damage to the unit.
Note2: Do not leave CDs in the device while transporting.
Duplicate and Verify
1. Connect the power cable to the back of the device.
2. Press and hold the power button for 2 seconds to turn on the device.
3. Insert a flash card into the appropriate card reader slot.
4. Press the “Open” button to release the cover and insert a blank CD-R/RW.
5. Close the cover and press the “Mode” and “Play/REC” buttons to begin
duplicating your flash card.
6. The device will first copy the date from the flash card, and then verify the
data is accurate. A short beep will indicate the duplication is complete.
7. The unit will display the % of storage left on the CD.
8. Press the “Open” button to release the CD.
Erasing a CD-RW
1. Connect the power cable to the back of the device.
2. Press and hold the power button for 2 seconds to turn on the device.
3. Press the “Open” button to release the cover and insert a CD-RW disc.
4. Close the cover and press the “MODE” and “STOP” buttons to begin
erasing the CD-RW disc.
5. A short beep will indicate the erasing is complete.
- 7 -