Kanguru Media X-Change 2.0 User Manual - 6. Troubleshooting.
Care for the unit:
Please carefully insert and remove memory cards from each slot.
Do not drop, bump, shock, or expose the unit to severe vibration while data is
being transmitted .
To reduce the risk of fire or shock hazard, do not expose this equipment to rain, any
liquid or moisture.
6. Troubleshooting.
Problem
While connected to the
computer, the unit
works great, but I cannot
download files from the
memory cards in the
stand alone mode.
Sometimes data trans-
fered from the memory
card to hard drive
looks faulty on a PC.
When I remove the
drive from my
computer , I get a
message that I
disconnected a device in
an unsafe way.
Cause
The disk or the memory
cards are not formated
to the FAT file systems
There may be a chance
of corrupt data or the
memory card is
damaged.
The drive was not
removed from the OS
properly.
Solution
To work in the stand-alone
mode, both the disk and the
memory cards must be
formated to the FAT or FAT-32
file systems.
Please back up the data in
the memory card and run
ScanDisk, Disk Defragmenter
or reformat the memory card.
• Under Windows, the 4
devices must be stopped by
the Stop hardware utility.
• Under MacOS, the mounted
devices must be thrown to
the bin.
• Under Linux, the mounted
devices must be unmounted
by the
umount
command.
12 Kanguru Media X-change 2.0