User manual oasis 50” tv stand supporting your digital lifestyle ™ 50” tv stand for 37” to 60” televisions english 37” - 60” 260 lbs (118 kg).
Introduction table of contents table of contents / introduction . . . . . . . . . . . . . 2 supplied parts & hardware . . . . . . . . . . . . . . . . . . 3 setup - step 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 setup - step 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ...
Supporting your digital lifestyle ™ supplied parts and hardware 3 • phillips screwdriver required tools l: middle and bottom glass (6mm) h: top frame d: 4mm allen key k: top glass (8mm) e: rounded wood ends f: backing board g: rear support frame x2 x2 a: m6 x 32mm hex head bolt x18 b: m4 x 15mm bolt...
4 step 1: attach metal frames to wood ends step 1.1 attach bottom frame loosely stand the wooden ends up, and position the bottom frame (j) to align the holes with the inset nuts on one wooden end (e). Insert two m6 x 32mm bolts (a) through the frame’s holes and tighten approximately halfway. Repeat...
Supporting your digital lifestyle ™ supporting your digital lifestyle ™ 5 step 2: attach backing board to frames step 2.1 position backing board. Position the backing board (f) against the back of the oasis tv stand, oriented as shown in diagram b. Step 2.2 start all six bolts. Starting with the top...
6 step 3: attach rear support frame and rubber bumpers step 3.1 position rear support frame. The rear support frame (g) has five sets of captive nuts on the front, and only two sets of captive nuts on the rear, as shown in diagram c. Position the rear support frame (g) facing front, as shown in diag...
7 step 4: place the glass diagram e supporting your digital lifestyle ™ to complete the assembly of your oasis stand, simply place the three pieces of glass on the frames from the front, as shown in diagram e. The top glass (k) is 8mm thick, and the other two pieces (l) are 6mm thick. Your stand is ...
Www.Kantoav.Com hello@kantoav.Com tel 604.231.9574 fax 604.231.9535 limited warranty to original purchaser kanto av systems (kanto) warrants the equipment it manufactures to be free from defects in material and workmanship for the following limited warranty period of: 24 months parts and labour if e...
