Kapture KPT-942 User Manual - page 16
16
5. After enabling FCWS, the screen will display alignment guidelines
please adjust the position of the Car Dash Cam so that the horizontal
guideline and the horizon line overlap and the diagonal lines are aligned
with the lane markings on screen. Make sure that the guide lines are not
obscured by any part of your vehicle (e.g. hood) during installation, as this
may affect the accuracy of
FCWS functionality.
6. Once your car’s location is determined by GPS, this product produces voice
and screen message alerts when you change lanes at speeds over 50 km/h.
Note:
1. FCWS is only active when satellite positioning is available. Make sure GPS settings on your Car Dash Cam is activated.
2. The Driving Safety functions such as LDWS, FCWS, Headlight Warning, Speed Cam Alert and Driver Fatigue Alert will be
disabled if the product isn’t connected to the external power supply.
3. The accuracy of the FCWS function is affected by poor visibility conditions, including rainy or cloudy weather, at night, or in poor
lighting environments. Drivers are advised to exercise discretion based on actual road conditions.
3.2.3 Front Car Movement Detection
(FCMD)
Once your vehicle’s location is
determined by GPS and the
FCMD function is enabled, the
Car Dash Cam will detect the
movement of the traffic in front
of you. When your car remains
motionless for 20 seconds it
produces voice and on screen
alerts when the car in front of you
moves forward.
To set the
FCMD, do the
following:
1. Press
(shown on screen
as
) to enter
Main Menu.
2. Use
and
buttons
to navigate to
Front Car
Movement Detection and press
to enter the menu.
3. Use
and
buttons to change the setting ON or OFF and press
to confirm.
4. Press
to exit the menu and return to the recording screen.
5. After enabling FCMD, the screen will display align icon
please adjust the Car Dash Cam so that the horizontal
guideline and the horizon line overlap and the diagonal lines are aligned with the lane markings on screen. Make sure that
the guide lines are not obscured by any part of your vehicle (e.g. hood) during installation, as this may affect the accuracy
of
FCMD functionality.