Kapture KPT-942 User Manual - page 17
17
6. Once your car’s location is determined by GPS, when your vehicle is
motionless for 20 seconds the Car Dash Cam produces voice and on screen
alerts when the movement of the traffic in front of you moves forward.
Note:
1. FCMD is only active when satellite positioning is available. Make sure GPS setting
on your Car Dash Cam is activated.
2. The Driving Safety functions such as LDWS, FCWS, Headlight Warning, Speed
Cam Alert and Driver Fatigue Alert will be disabled if the product isn’t connected
to the external power supply.
3. The FCMD function may give false alarms in poor visibility conditions, including
rainy or cloudy weather, at night, or in poor lighting environments. Drivers are
advised to exercise discretion based on actual road conditions.
4. FCMD will automatically recalibrate 30 seconds after the initial alert if the FCMD
function has been activated.
3.2.4 Headlight Warning
The
Headlight Warning function
produces voice and screen
message alerts when the Car
Dash Cam detects poor lighting
conditions. To set the headlight
warning, please follow the
instructions below:
To set the headlight warning,
please follow the instructions below:
1. Press
(shown on screen as
) to enter
Main Menu.
2. Use
and
buttons to navigate to
Headlight Warning and press
to enter the menu.
3. Use
and
buttons to change the setting ON or OFF and press
to confirm.
4. Press
to exit the menu and return to the recording screen.
5. The Car Dash Cam will now produce voice and on screen alerts when it
detects poor lighting conditions.
Note:
The Driving Safety functions such as
LDWS, FCWS, Headlight Warning, Speed Cam Alert and Driver Fatigue Alert will be
disabled if the product isn’t connected to the external power supply.