Karcher BD 530 BAT Manual - Stopping And Switching Off
Operating Instructions BR/BD 530 XL BAT/ Package
English
26
Lowering the suction bar
n
Press down the lever; the suction bar is
lowered.
n
Switch on the suction motor with the
switch.
Information:
The suction bar automatically adapts
itself to the floor conditions and does not
require any special adjustment.
To improve the vacuuming result, the
suction bar can be rotated or tilted.
Switching on the brush head
Caution!
To prevent damage to the floor,
do not operate the unit on the spot.
n
Actuate the trigger lever, the brush
motor starts.
Stopping and switching off
the unit
n
Close control knob for water flow rate.
n
Move the unit forwards another 1–2 m to
extract any remaining water.
n
Switch off the brush mode switch and
suction motor.
n
Raise the suction bar.
n
Press down the push handle.
In the cleaning head the locking lever
folds down and keeps the unit in the off
position.
Caution!
When work is complete, the disc
brushes or the brush rollers must be
unloaded (risk of deforming the brushes).
Draining the dirty water
Caution!
Observe local regulations for the
treatment of waste water.
n
Take the drainage hose out of the holder
and place in a suitable receptacle. Drain
off the dirty water by opening the
metering equipment. Then rinse out the
dirty-water tank with fresh water.
i