Page 1/10 international service information international service information june 24th, 1999 hd 1050 b new unit information hd 1050 b 1.810-987 5.905-950
Page 2/10 international service information international service information june 24th, 1999 hd 1050 b new unit information equipment 1 high-pressure hose connection 2 pressure and flow control 3 servopress handgun 4 spray lance 5 three-way nozzle 6 cleaning agent metering valve 7 cleaning agent su...
Page 3/10 international service information international service information june 24th, 1999 hd 1050 b new unit information technical features pump 1 pressure gauge 2 non-return valve 3 pressure valve 4 oil reservoir 5 shaft seal 6 swash plate bearing 7 swash plate 8 axial roller bearing 9 oil drai...
Page 4/10 international service information international service information june 24th, 1999 hd 1050 b new unit information function of overflow valve 1 high-pressure outlet 2 cleaning agent injector 3 cleaning agent connection 4 control pressure injector 5 pressure gauge 6 screw plug for non-retur...
Page 5/10 international service information international service information june 24th, 1999 hd 1050 b new unit information 1. Servopress handgun is open. When the handgun is completely open, water flows from the pressure chamber (7) through the non-return valve (6) and both injectors (2+4) to the ...
Page 6/10 international service information international service information june 24th, 1999 hd 1050 b new unit information adjustment of the bowden cable 1 throttle lever 2 inner bowden cable clamping screw 3 outer bowden cable clamp 4 throttle lever stop screw 5 bowden cable 6 adjusting screw wit...
Page 7/10 international service information international service information june 24th, 1999 hd 1050 b new unit information adjustment overflow valve note before any adjustments the high-pressure nozzle, air filter and spark plug must be checked for damage or wear. All defective parts must be repla...
Page 8/10 international service information international service information june 24th, 1999 hd 1050 b new unit information note: before adjusting the full-load r.P.M. Of the engine, the overflow valve must be adjusted. 1. Open shut-off valve completely, set servopress handgun to maximum water volu...
Page 9/10 international service information international service information june 24th, 1999 hd 1050 b new unit information troubleshooting problem remedy engine does not start. Check gaseoline system / clean if required. Check spark plug / replace if required. Check oil level and oil level sensor....
Page 10/10 international service information international service information june 24th, 1999 hd 1050 b new unit information . Technical data special tools shut-off valve 4.580-034 testing pressure gauge 4.742-025 r.P.M. Counter 6.803-012 digitalversion 6.491-361 mechanical version the technical da...
