Karcher K 2.400 Operating Instructions Manual - Technical Specifications
English
11
Check setting at the spray lance.
Appliance ventilation: Switch the appli-
ance on with the high-pressure hose
detached and operate (max. 2 minutes)
until the water exits the high-pressure
connection without bubbles. Switch off
appliance and reconnect high-pressure
hose.
Check the water supply.
Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.
Clean high-pressure nozzle: Remove
dirt and debris from the nozzle bore, us-
ing a needle and rinse through with wa-
ter from the front.
Check water flow quantity.
Slight leakage from the appliance pump
is normal. If the leakage increases con-
tact the authorized customer service.
Remove the spray lance from the hand
spray gun and work with the hand spray
gun only or use the spray lance with
pressure regulation and turn to "Mix".
Clean the detergent suction hose filter.
Check the detergent suction hose for
kinks.
Subject to technical modifications!
Australia
KÄRCHER Pty. Ltd.
40 Koornang Road
Scoresby, Victoria 3179
1800 675 714 (Free Call)
www.karcher.com.au
Pressure does not build up in the
appliance
Strong pressure fluctuations
Appliance is leaking
No detergent infeed
Technical specifications
Electrical connection
Voltage
220-240
1~50/60
V
Hz
Connected load
1,6 kW
Protection class
IP X5
Protective class
II
Mains fuse (slow-blow)
10 A
Water connection
Max. feed pressure
1,2 MPa
Max. feed temperature
40 °C
Min. feed volume
8 I/min
Max. Suction height
0,5 m
Performance data
Working pressure
9 MPa
Max. permissible pressure
12
1700
MPa
psi
Water flow rate
5,8 I/min
Detergent flow rate
0,3 I/min
Recoil force of trigger gun
12 N
Dimensions and weights
Length
242 mm
Width
280 mm
Height
783 mm
Weight 5,4 kg
Values determined as per EN 60335-2-79
Hand-arm vibration value
Uncertainty K
0,3
m/s
2
m/s
2
Sound pressure level L
pA
Uncertainty K
pA
73
3
dB(A)
dB(A)
Sound power level L
WA
+
Uncertainty K
WA
89 dB(A)