Karcher K 2 Classic Manual - Description of The Appliance
14 English
Illustrations on Page 2
1 Water connection with integrated sieve
2 Coupling element for water connection
3 Hose coupling
4 High pressure connection
5 Appliance switch "0/OFF“/ „I/ON“
6 Storage for spray lance
7 Carrying handle
8 Detergent suction hose (with sieve)
9 Mains cable with mains plug
10 Trigger gun
11 Lock trigger gun
12 Clamp for high pressure hose
13 High pressure hose
14 Spray lance with high pressure nozzle
For normal cleaning tasks.
** not included in the scope of delivery
15 Water supply hose
Use a fabric reinforced water hose.
Minimum length 7.5 m.
Minimum diameter, 1/2 inches (13 mm).
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
Pull out the clamp for the high pressure
hose from the hand spray gun.
Illustration
Connect high pressure hose to trigger
gun.
Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
Park the appliance on an even surface.
Illustration
Connect the high pressure hose to the
high pressure connection of the appli-
ance.
Insert the mains plug into the socket.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Illustration
Screw the supplied garden hose con-
nector on to the end of your water sup-
ply hose.
Illustration
Attach the water supply hose to the
coupling on the water connection.
Connect the water supply hose to the
water supply.
Completely open the water tap.
ATTENTION
Dry running of more than 2 minutes leads to
damage of the high-pressure pump. If the
appliance does not build up pressure within
2 minutes, switch the appliance off and pro-
ceed in accordance with the instructions in
Chapter "Troubleshooting".
몇 CAUTION
Keep a distance of at least 30 cm when us-
ing the jet for cleaning painted surfaces to
avoid damage.
Illustration
Push the spray lance into the trigger
gun and fasten it by turning it through
90°.
Turn on the appliance “I/ON”.
Description of the Appliance
Special accessories
Assembly
Start up
Water supply from mains
Operation
High pressure operation