Karcher KA 1015 User Manual - page 25
EN | 25
EN
Tools required
Included
•
Drill and 1/4” drill bit
•
Ruler or tape measure
•
Nail
•
Scissors
•
Phillips head screwdriver
•
Masking tape
•
Safety glasses
•
3x Spacers
•
3x Washers
•
•
3x Screws
•
Mounting template
Before Mounting
Empty contest of the selected cabinet under which the unit will be mounted and thoroughly clean the
underside of the cabinet to remove any grease residue which might be present. We recommend the
unit be mounted at the front edge of the cabinet.
Important:
•
The installation of the unit under a cabinet should only be carried out by a qualified technician.
•
For secure mounting, the screws must go into the radio to a depth of at least 3/8”. If the overall
length from the bottom of the cabinet shelf to the bottom of the over hand is more the 1-3/4”.
Then a wood shim will be necessary. A shim can be made from a sheet of plywood, using the
Template to located the central lines for drilling the 1/4” mounting holes; the shim can be located
between the cabinet shelf bottom and spacers. Make sure the wood is at least as thick as the
exces over 1-3/4” if a shim is necessary, longer screws are required. Longer screws (Type#10-
32) are available at most local hardware stores Cut out the template on the line indicated. The
template size and the screw hold positions are identical to the top of the Clock radio.