Karcher KA 1015 User Manual - page 28
28 | EN
Battery Backup:
Two AAA size batteries (2x 1.5V, not included) may be installed as a backup option to maintain the
time if electrical power fails. In the event of a power outage, the time will not appear on the clock LCD
Display, however the clock will continue to operate and the actual time will be maintained. The Clock
LCD Display and other functions will resume once electrical power is restored if used the backup bat-
tery. Remove the battery if the clock is not used or stored for long periods of time.
Open the battery compartment door by rotating
the lock in the direction of the arrow
.
Basic Functions
CLOCK SETTING
While in the CD or Radio mode, Press “Display/AL.Set” once time to enter the time mode.
1. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to hour adjustment mode (Hour will
begin to flash)
b. Press SKIP >>| or SKIP |<< button to desired time. (e.g. 10:27pm -> 9:27am).
c . Press MEMORY/C-ADJ button, enter to minute adjustment mode.( Minute will begin to flash).
d . Press SKIP >>| or SKIP |<< button to desired time. (e.g. 9:27am -> 9:20am) e) and then press
MEMORY/C-ADJ button, finish clock adjustment.
Note:
For 12 Hour display, If the time is pm, then PM icon will appear.
Time setting is invalid if the time always flashes.
ALARM TIME SETTING
While in the CD or Radio mode, Press “Display/AL.Set” twice times to enter the alarm time set
mode (the bell icon will appear and begin to flash).