Karcher MC 6420 User Manual - page 16
16 | EN
AUTO-OFF FUNCTION
This product is equipped with an auto power-save function in CD & USB modes. If the unit remains
in STOP, PAUSE or NO DISC mode for more than 10 minutes, it will automatically switch off. Please
press the PLAY/PAUSE button to reactive the unit.
Remote Control
1.
STOP
2.
MODE
3.
SKIP +
4.
+ 10
5.
PLAY / PAUSE
6.
PROGRAM
7.
SKIP -
8.
ALBUM
Battery Installation
Insert a “Cell” size batterie (CR2025, 3V) into the battery compart-
ment. Be sure that the batteries are inserted correctly to avoid
damage to the remote control. Always remove the batteries when the
remote control will not be used for a long period of time, as this will
cause leakage to the batteries and subsequently damage to your set.
Notes:
•
If the distance required between the remote control and the appliance decreases, the batterie is
exhausted. In this case replace the batterie with a new one.
•
Power button on main unit must be ‘On’ in order for Remote Control to operate.
Sensor Window Of The Receiver
•
Even if the remote control is operated within the effective range, its operation may be impossible
if there are any obstacles between the appliance and the remote control.
•
If the remote control is operated near other appliances which generate infrared rays, or if other
remote control devices using infrared rays are used near the appliance, it may operate incor-
rectly.
Radio Operation
General Operation
1.
Set the “FUNCTION” selector to “RADIO” mode.
2.
Select desired band by using the “BAND” selector.
3.
Adjust radio frequency to your desired station by using the “TUNING” control.
4.
Adjust the “VOLUME” control to the desired level.
FM / FM-Stereo Reception
•
Set the “BAND” selector to FM mode for MONO reception.
•
Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up
to show FM ST. mode.
+