Karcher MC 6420 User Manual - page 17
EN | 17
EN
For Better Reception
FM - This appliance has a FM antenna located at the rear cabinet. This wire is completely unraveled
and extended for better reception.
AM - This appliance is equipped with a built - in directional ferrite AM antenna. Rotate the appliance to
get better reception.
CD / MP3 Operation
General Operation
PLAY / PAUSE
►||
Press to start playing CD/MP3 disc.
Press again to stop playing CD/MP3 operation temporarily.
Press again to resume playback.
SKIP+
►►| &
SKIP-
|◄◄
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
STOP ■
Press to stop all CD/MP3 operation.
Playback
1.
Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
2.
Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
3.
Close the CD door slowly. Closing the CD door too quickly or to powerfully may damage the
mechanism.
4.
Focus search is performed if disc is inside.
For CD disc - Total number of tracks is read and appears on the display.
For MP3 disc - “MP3” appears on the display.
5.
Playback will start automatically from the first track.
6.
Adjust the “VOLUME” control to the desired level.
7.
Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
8.
Press the “STOP” button when finished.
Program
Up to 20 tracks fo CD disc, 99 tracks of MP3 disc can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1.
Press the “PROG” button on the remote control, the display will show “P01” and flash.
2.
Select desired track by using the “SKIP +” or “SKIP -” button. ( You may select a desired album
by pressing the “ALBUM” button. )
3.
Press the “PROG” button again to confirm desired track into the program memory.
4.
Repeat step 2 and 3 to enter additional tracks into the program memory.
5.
When all the desired tracks have programmed, press the “PLAY / PAUSE” button to play the disc
in the order you have programmed.
6.
Press the “STOP” button twice to terminate programmed playback.
Repeat Modes and Random Playback
Press the “MODE” button before or during playing CD / MP3
disc, each press switches the mode function as follows:
1 - REPEAT 1
2 - REPEAT ALBUM ( *MP3 ONLY )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK