Karcher RA 2600BT User Manual - page 16
16 | EN
Volume Setting
•
To increase the volume, press the VOL+ button.
•
To decrease the volume, press the VOL- button.
Radio
1.
Switch the unit on as described previously.
2.
Press the FUNCTION button repeatedly to select radio mode “tun”. The frequency will be shown
in the display.
3.
Select a desired radio station by pressing the
or
button repeatedly.
4.
To automatically search for the next available radio station, press and hold for 2 seconds the
or
button.
5.
For the best reception fully extend the FM antenna.
Radio Station Presets
This unit enables you to store up to 20 radio stations.
1.
Tune to a radio station which you would like to store.
2.
Press and hold for 2 seconds the PRE-UP/+10/PRO
button. The presets will start flashing (e.g.
“P01”).
3.
Select a desired preset place from P01 - P20 on which you want to store the current frequency by
pressing the
or
button.
4.
Press the PRE-UP/+10/PRO
button again to confirm your setting.
5.
Repeat steps 1 - 4 to store up to 20 frequencies.
6.
To recall a stored frequency, repeatedly press the PRE-UP/+10/PRO button until you reach the
desired preset.
Notes:
•
If the unit is disconnected from the power supply or batteries are removed, the radio station
memory will be erased.
•
A preset station can be overwritten by storing another frequency on that preset.
MP3 Playback via USB or SD
This unit is equipped with a USB socket and SD/MMC card
reader which can accept and play MP3 files stored on stan-
dard USB flash drives and SD or MMC storage cards.
1.
While the unit is in standby mode insert a suitable USB
flash drive or SD card into the USB port or SD card
reader on the unit.
2.
Switch the unit on and select either the USB mode
(“USb“) or SD mode (“Sd“) by pressing the FUNCTION
button repeatedly.
3.
The USB flash drive or SD card will be read and the
total number of tracks will be shown in the display.
4.
Playback starts automatically once the USB flash drive or SD card is read. If not, press the PLAY/
PAUSE
button to start the playback.
5.
To temporarily stop the playback (pause), press the PLAY/PAUSE
button once. The display
will be flashing. Press the button again to resume playback.
6.
To stop playback, press the STOP
■ button.
Fast Forward / Fast Rewind & Skipping Tracks
•
To jump to the previous track, press the
button once.
•
To skip to the next track, press the
button once.