Karcher RA 2600BT User Manual - page 18
18 | EN
5.
Once a device is connected, the BT LED indicator will be lit steadily.
6.
You can now play music on your device, it will be heard over the unit speaker.
7.
The unit automatically connects to your external device if it has been paired with the unit before,
unless RA 2600BT is currently connected via Bluetooth
®
to another device.
Note:
•
Only one device can be connected and played at a time.
Volume Control
•
Increase and decrease the volume using the VOL+ and VOL- buttons on the RA 2600BT and
using the volume controls on your connected device.
•
Additionally you can set the equalizer on your connected device in order to reach the perfect
sound.
Note:
•
If there is no playback, ensure that neither the unit nor your Bluetooth
®
device are set to zero
volume and the right device for playback is paired and connected.
Additional Guidelines for Bluetooth
®
Devices
•
The short wave radio signals of a Bluetooth
®
device may impair the operation of other electronic
and medical devices.
•
Switch off the device where it is prohibited.
Compatibility Disclaimer
•
Wireless performance is dependent on your device’s Bluetooth
®
wireless technology. Refer to
your device’s user manual.
•
The manufacturer cannot be held liable for any loss or leakage of or damage to data.
AUX Input
You can connect the audio output of an external device such as a CD or MP3 player to this unit to
listen to the sound of that device through the amplifier of this music system.
•
To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm
plugs) (not included) to connect the headphone out or audio line out of the external device to the
AUX input socket of this unit.
•
Switch the unit on and select the AUX mode “AU in” by pressing the FUNCTION button.
•
Switch the external device (e.g. MP3 player) on.
•
Start playback of the external device and adjust the volume of RA 2600BT and your external
device to a desired level.
•
Remember to switch off the unit when you are finished using the external device.
Troubleshooting
If there should be any problem with this product, please try to solve it with the help of the following
information before contacting service. Most problems can be solved easily.
•
RA2600BT cannot be powered on
Make sure that the unit is properly connected to a power source. If you are using batteries, make sure
that they are not empty. Replace them with new ones if necessary.
•
There is no Bluetooth
®
link between
RA2600BT and the external device
Ensure that your Bluetooth
®
enabled device supports the A2DP profie. Refer to its user manual on how
to turn on the Bluetooth
®
functions and capabilities.