Karcher RA 2600BT User Manual - page 17
EN | 17
EN
•
To fast forward the currently playing track, press and hold the
button. Once you reach the
desired section of the track, release the button to resume normal playback.
•
To fast rewind the currently playing track, press and hold the
button. Once you reach the
desired section of the track, release the button to resume normal playback.
•
To skip 10 tracks at a time, press the PRE-UP/+10/PRO button once. This is especially helpful for
USB flash drives or SD cards which contain many MP3 files.
Playback Modes
At any time during playback, repeatedly press the REPEAT/RANDOM
button to select one of the
playback modes. Each press of the button will change the mode as follows:
(1) Random
(2) Repeat 1
(3) Intro
(4) Off (normal playback)
Mode
Indicator in Display
Random (all tracks are played in random order)
RAN
Repeat 1 (the current track will be repeated)
Intro (each track plays for 10 seconds)
INTRO
Off (normal playback)
-------------
In normal playback after the last track is finished, the unit will start playback again from the very first
track.
Notes:
•
A USB device must always be connected directly to the USB port of this product. The use of a
USB extension cord is not supported by this product. The USB port of this product cannot com-
municate with a computer directly.
•
The reading time for a USB drive or SD card varies depending on the speed of the memory
device and the number of songs and folders. In some cases the reading time may be as long as
60 seconds.
•
Always switch off the unit before removing a USB flash drive or SD card to prevent damage to the
USB device or memory card. The manufacturer is not responsible for the loss or damage of data.
•
This unit does not support USB MP3 players due to their inherent lack of software compatibility.
Only USB “pen drives” (flash memory usb drives) can be used for MP3 playback.
•
Only MP3 files can be played. Due to numerous methods of compression it could be that some
files or USB flash drives cannot be played.
Bluetooth
®
Wireless Playback
This unit can wirelessly stream audio from any Bluetooth
®
device within approximately 10 metres.
Obstacles such as walls and other devices may limit this range.
Simply pair the device and enjoy wireless playback and control from your compatible Bluetooth
®
device.
1.
Switch the unit on and select the Bluetooth
®
mode “bt” by pressing the FUNCTION button.
2.
Turn on the Bluetooth
®
function in your device. Please refer to your device’s manual for further
details.
3.
Pairing with a new device
for the first time: BT LED indicator flashes slowly.
Connecting to an already paired device:
BT LED indicator
flashes rapidly.
4.
Go to your device’s Bluetooth
®
settings.
Add or search for devices.
When the model no. “RA 2600BT” appears, select the device.
If asked for a pass code, enter “0000”.