Karcher RR 510(N) User Manual - Cd Playback
EN | 21
EN
Note:
During play, when the end of the tape is reached the
PLAY
button will pop up and play will stop. To
play the other side of the tape, remove the cassette, turn the cassette over so that the full reel is on
the right, insert the cassette and press the
PLAY
button.
Care of Cassette Tapes to Help Avoid Tangles
Loose tape may jam or get tangled in the cassette player. With a hexagonal
pencil or a similar tool, gently turn the pencil to tighten the tape, as shown
opposite.
If the spool feels tight when taking up slack tape as described above, this may
be due to ridges on the spool of tape. Tight spools can lead to uneven play-
back speed or tape tangling. In most cases the ridges can be removed by fast
winding the cassette from one end to the other and back again.
Avoid the use of C120 tapes with this unit.
Maintenance
If the sound becomes muffled or in any case after every 15 hours of operation,
clean the pinch roller, capstan and play head. Open the cassette door and use a
cotton bud moistened with special tape head cleaning fluid.
CAUTION
Never touch any of the parts described above with a metal object. Do not insert
a cassette until the cleaned parts are completely dry.
CD Playback
Loading a Disc
1. Open the CD door by the OPEN area.
2. Insert a disc with the label side facing upward.
3. Close the CD door.
Note:
Never touch the laser lens inside the CD compartment. If it ever gets dirty, clean it with a CD
cleaner disc.
Removing a Disc
1. Make sure the CD is not playing. If it is, press the
CH-/STOP
button.
2. Open the CD door.
3. Gently remove the disc.
4. Close the CD door by hand.
5. Replace the disc in its protective storage box.
Playing a CD
1. Turn the unit on by pressing the
POWER (ON/OFF)/SOURCE
button.
2. Press the
POWER (ON/OFF)/SOURCE
button repeatedly to select the CD mode (“CD” is shown
Play Head
Pinch Roller
Capstan
Cotton Bud