Karcher RR 510(N) User Manual - Stereo Headphone Connector
24 | EN
Playback modes
Skipping, fast forwarding and fast rewinding tracks, repeat modes and intro & random functions in
USB mode are the same as for MP3-CD playback. Please see the previous chapter for the instruc-
tions.
Notes:
•
A USB device must always be connected directly to the USB port of this product. The use of a
USB extension cord is not supported by this product. The USB port of this product cannot com-
municate with a computer directly.
•
The reading time for a USB drive varies depending on the speed of the memory device and the
number of songs and folders. In some cases the reading time may be as long as 60 seconds.
•
Always switch off the unit before removing a USB flash drive to prevent damage to your USB
device. The manufacturer is not responsible for the loss or damage of data.
•
Due to numerous methods of compression it could be that some files or USB flash drives cannot
be played.
Stereo Headphone Connector
A Stereo Phone Jack (3.5mm) has been provided on the top of the cabinet, so that you can listen to
the set without disturbing others. To use this jack, plug in low impedance headphones/earphones
(not
included)
and adjust the
VOLUME CONTROL
to a comfortable listening level.
Note:
When external headphones/earphones are connected, the sound from the unit of main speakers
will be muted.
Caution: Listening at high power for a long moment could damage users’ ears.
Technical Specifications
GENERAL
Power requirement
AC 100-240V~50/60Hz
DC
9V
(6x UM-2/C batteries 1.5V,
not included
)
Power consumption (max.) 9W
Weight
ca. 2 kg
Dimensions
ca. 360 x 215 x 185 mm (WxDxH)
Operation temperature
+5ºC ~ + 35ºC
RECEIVER SECTION
Receiving band
FM
Tuning range/sensitivity
FM 87.5 - 108 MHz
CD PLAYER SECTION
Playback system
Compact Disc Digital Audio System
DAC
1 bit D/A converter
With 8 times over sampling digital filter
CASSETTE PLAYER
Playing system
2 channel stereo
Frequency response
125 -6300 Hz
Wow and flutter
0.35% WRMS (JIS)
AUDIO SECTION
Speaker impedance
8 ohms
Headphones impedance
32 ohms
Technical specifications and design may change without notice.