Karcher RR 510(N) User Manual - Usb Playback
EN | 23
EN
display.
•
press the
MEMORY/PROGRAM/MODE
button a sixth time to deactivate the repeat function and
return to normal playback.
Anti-Shock Protection
A special circuitry inside the player guarantees that there will be no sound skipping when the player is
subject to shock and shaking in music playback. The laser scans the CD/MP3 disc and saves data for
up to 4/40 seconds ahead of where the playback is on the disc.
If there is too much vicious vibration or shaking exerted on the player, the player may malfunction and
sound skipping is caused.
When this happens, place the player on a level table where no vibration will be brought. Normal sound
will resume immediately.
Programmed Play (CD)
The tracks on the disc can be programmed for play in any order (up to 20 tracks can be programmed).
1. While in CD stop mode, press the
MEMORY/PROGRAM/MODE
button. “PROG” and “001 P-01”
are shown in the LCD,
the track number “001” is flashing.
2.
Select the first track to be programmed using the
TUNING+/SKIP/SEARCH UP
button or the
TUNING-/SKIP/SEARCH DOWN
button, and then press the
MEMORY/PROGRAM/MODE
but-
ton again to store and advance to the next programming step.
3. Repeat the above steps to program more tracks. A maximum of 20 tracks for CD can be pro-
grammed in memory in a preferred order.
4. Press the
CH+/PLAY/PAUSE
button to begin programmed play in the preferred order after you
are done with programming. The player stops automatically after all programmed tracks are
played.
5. You may press the
CH-/STOP
button to terminate programmed playback. In program stop mode,
press the
CH+/PLAY/PAUSE
button to begin the programmed playback with the programming
order identical with the previous one done. Press the
CH-/STOP
button again to clear the pro-
gramming.
6. During programmed playback, press the
MEMORY/PROGRAM/MODE
button once to repeat the
current track; press the button twice to repeat all the programmed tracks; press the button three
times to exit repeat mode.
Programmed Play (MP3/WMA/USB)
On MP3/WMA discs or USB playback up to 99 tracks can be programmed.
For the MP3/WMA/USB programming, it is necessary to select an album first and then a track in this
album.
1. At stop mode, press the
MEMORY/PROGRAM/MODE
button. “PROG” and “01 001 P-01” are
shown in the LCD, the album number “01” is flashing.
2. Press the
TUNING+/SKIP/SEARCH UP
button or the
TUNING-/SKIP/SEARCH DOWN
button to
select an album and then press the
MEMORY/PROGRAM/MODE
button to confirm.
3. The further operating steps are the same as the CD programming described above.
Note:
ID information: For playing some MP3 disc with ID information, the LCD display can show the
title of the disc/names of the artists and ALBUM.
USB Playback
1. Press the
POWER (ON/OFF)/SOURCE
button to turn the unit on.
2. Insert a USB stick to the USB port.
3. Press the
POWER (ON/OFF)/SOURCE
button repeatedly to switch to USB mode (“USB” is
shown in the display).
4.
When the inserted USB is detected and read, the first track will be played automatically.
5. Press the
CH+/PLAY/PAUSE
button to pause or resume the playback.
6. Press the
CH-/STOP
button to stop the playback.