Karcher SE 4001 Manual - Dry Vacuum Cleaning
16 English
몇
Caution
Always work with the filter bag inserted, ex-
cept when a cartridge filter is used (option).
The reservoir and accessories must be dry
to prevent parts from sticking together.
Note: If the device is preferably used for
dry vacuuming, we recommend removing
the spray handle and the spray hose.
Illustration
Remove the spray hoses and mounting
clips from the suction hose and suction
pipes.
Press the two locking noses on the
sides and pull the spray handle off the
handle.
Illustration
Insert a filter bag.
Select the desired accessories and at-
tach to the suction pipes or directly to
the handle.
Switch on suction (position I).
Insert the hard surface inlay into the
floor nozzle. The bristles should point
towards the front.
Work without the hard surface insert.
Illustration
Use the surrounding air separator to
adapt the suction force.
Note: Close the surrounding air separa-
tor again after use!
몇
Caution
Do not use a filter bag!
Immediately switch the appliance off or pull
the power plug if foam forms or liquids es-
cape!
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the contain-
er.
Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or
directly to the handle.
Switch on suction (position I).
Illustration
Open the surrounding air separator if
water is suctioned from a tank. Close it
again after use.
Empty the full reservoir (refer to chapter
"Empty reservoir").
Dry vacuum cleaning
Vacuuming hard surfaces
Vacuuming carpeted floors