Karel IP111 User Manual - Network Setting

32

Go to Account->Basic, choose Transport option, in the pull-down menu, you can choose the 

TLS option, then click the Confirm button to save the change. 

NETWORK SETTING 

PC Port Setting 

Please refer to the previous part “Configuration and Registration” for the basic Network WAN 

setting information. The following table lists the instructions of the field about the 

Network PC Port Setting. 

Field Name 

Description 

As Bridge 

If you select the Bridge mode, then the two Fast Ethernet ports will 

be transparent. 

As Router 

If you select the Router mode, the SIP phone will work as a router. 

IP address 

User could configure the PC port IP address. 

Enable DHCP 

Server 

If you set the DHCP server on, the device connected to the PC port 

will get the IP address automatically between the start IP address 

and the end IP address. But if you select the bridge mode, the DHCP 

server can not work. 

Start IP Address 

Indicate the range of the IP address. 

End IP Address 

Indicate the range of the IP address. 

To configure PC Port settings via Phone interface: 

1) Press MENU->Settings->Advanced. 

2) Enter the password required, scroll to Network option, press OK button and select 

PC Port option, then press OK button to enter. 

3) If you choose Bridge, it will return to the previous menu. 

4) If you choose Router, you will be prompted to enter the IP, Subnet Mask, DHCP 

Server Disable/Enable. 

5) Press OK button to save the changes, or MEBU to return to the previous menu. 

To configure PC Port via Web interface: