Karel IP111 User Manual - Maintenance Tasks

34

Go to Network->Advanced, choose WebServer option, in the pull-down menu of Type field, 

choose the transmission mode, then click the Confirm button to save the changes. 

MAINTENANCE TASKS 

Administrator Mode 

The phone allows two modes to configure the phone: 

- User Mode 

- Administrator Mode 

Administrator mode grants unlimited access to the phone configuration on both Web and 

Phone interface. User Mode is not able to access the settings on the Phone interface such 

as: Accounts, Network, Reset to Factory, other phone settings. The permissions of the two 

modes can also be set according to user requirements. 

The default mode is User. Users can switch the mode via Phone interface: 

1) Press MENU->Level->OK to enter the configuration page. 

2) Enter the User Type and Password you want to switch to. 

3) Press the OK button to save your changes. 

4) Go to MENU->Settings page, you will find the type you just added in the list. 

Administrator/User Password 

Administrator mode grants unlimited access to the phone configuration on both web and 

phone user interface. The administrator/user password is used to access: 

- Web interface along with user name. 

- the advance settings of the phone such as Network, Account, Reset to Factory 

Settings via the Phone interface. 

The default password of User and Admin is user  and  admin  in sequence. And the user 

name for Web interface access is admin. 

To change the administrator password via Phone interface: 

1) Press MENU->Settings->Advanced->OK->Set admin PWD->OK. 

2) You are prompted to enter the Current PWD, New PWD and Confirm PWD, Press abc 

to change the input method. 

Note: 

For more details of the HTTPS, you can consult with your system administrator.