Karel IP111 User Manual - page 51

43

To assign the key as Redial: 

1) Choose Phone->DSS Key->Line Key, choose one of the key you want to make the 

assignment, there is a pull-down menu in the Type field, choose KeyEvent from the list, then 

in the Mode field, open the pull-down menu and choose Redial from the list. 

2) Press Confirm button to save the changes. 

Call Return 

When the key is configured as Call Return key you are allowed to dial out the last phone call 

you received. 

To assign the key as Call Return: 

1) Choose Phone->DSS Key->Line Key, choose one of the key you want to make the 

assignment, there is a pull-down menu in the Type field, choose KeyEvent from the list, then 

in the Mode field, open the pull-down menu and choose Call Return from the list. 

2) Press Confirm button to save the changes. 

Pick Up 

When you configure a Pick Up key, you specify the extension that you want to monitor. Then, 

when the monitored extension receives a call, you can press this key to pick up the incoming 

call. 

To assign the key as Pick Up: 

1) Choose Phone->DSS Key->Line Key, choose one of the key you want to make the 

assignment, there is a pull-down menu in the Type field, choose KeyEvent from the list, then 

in the Mode field, open the pull-down menu and choose Pick Up from the list. 

2) In the "Line" field, select a line for which to apply this key, and enter the extension number 

you want to pickup. 

3) Press Confirm button to save the changes. 

Call Park 

Call Park is a feature that allows a person to put a call on hold at one telephone set and 

continue the conversation from any other telephone set. 

The “call park” feature is activated by pressing a preprogrammed button or a special 

sequence of buttons. This transfers the current conversation to an unused extension number 

and immediately puts the conversation on hold. The telephone system will then display the 

extension number of the parked call so that the call can later be retrieved. 

To assign the key as Call Park: 

1) Choose Phone->DSS Key->Line Key, choose one of the key you want to make the 

assignment, there is a pull-down menu in the Type field, choose KeyEvent from the list, then 

in the Mode field, open the pull-down menu and choose Call Park from the list. 

2) In the "Line" field, select a line for which to apply this key, and enter the extension number 

you want to park. 

3) Press Confirm button to save the changes.