Digital color printer kip c7800 hardware operation guide version a.0 - please read this hardware operation guide before using the printer. - please keep this hardware operation guide for future reference. Katsuragawa electric co., ltd..
(1) thank you for purchasing the digital color printer kip c7800. This hardware operation guide contains functional and operational explanations for the kip c7800. Please read this hardware operation guide carefully before using the printer. Please keep this hardware operation guide for future refer...
Chapter 1 before use 1-2 1. 1 installation requirements the following conditions are required for installation of the equipment. (1) power source should be as follows (according to your region). U.S.A. / europe 220 to 240v (+6% to -10%), 20a or higher, and 50/60hz (2) the equipment must be on an exc...
Chapter 1 before use 1-5 1. 4 specifications subject specification model kip c7800 type console printing method led array electro photography color cmyk photoconductor organic photoconductive drum print speed color : 100mm / second max. (4.6ppm / 36”x48”) (4.7ppm / a0) (for roll deck 3) , speed vari...
Chapter 1 before use 1-6 subject specification media plain paper / bond: color mode: 70 to 150g/m 2 * for heavier media (90 to 150g/m 2 ), use media type setting “heavy”. Mono mode: 70 to 75g/m 2 environmental condition temperature 15 to 27 degrees centigrade humidity 20 to 70% rh storage condition ...
Chapter 2 basic operations 2-3 4. The kip c7800 will get ready about 3 minutes after turning on. The status indicator stops blinking and lights green when ready. Make a copy or print from outer devices..
Chapter 2 basic operations 2-4 2. 2 turning off the kip c7800 1. Press “ ” side of the power switch on the front to turn off the kip c7800. 2. The status indicator flashes light purple while the embedded controller unit is shutting down. It will turn off in 2 minutes. Note the controller unit starts...
Chapter 2 basic operations 2-5 3. If you completely shut the power supply due to a long vacation or the machine’s transport, turn off the circuit breaker and then remove the power cable from the machine..
Chapter 2 basic operations 2-26 2. 8 sleep mode the kip c7800 has two sleep modes to reduce the power consumption. The kip c7800 will enter sleep mode after a certain period of inactivity. In the default setting; • warm sleep mode will start after a 15 minute of inactivity in order to reduce the pow...
