Katsuragawa Electric KIP C7800 Hardware Operation Manual - Note
of
10
Chapter 2 Basic Operations
2-2
2. 1 Turning on the KIP C7800
1. Plug the KIP C7800 to an exclusive wall outlet.
2. Press “|” side of the Power Switch on the front to turn on the KIP C7800.
3. The Status Indicator above the Power Switch flashes green while warming up.
NOTE
Please confirm the outlet satisfies the following condition before plugging the KIP C7800 into.
220-240V (+6% to -10%), 20A, and 50/60Hz
Status Indicator (Blink)
Press this side
NOTE
The machine does not operate at all If the
circuit breaker is turned off.
Flip up the circuit breaker switch to turn on the
power supply.