Katsuragawa Electric KIP C7800 Hardware Operation Manual - 1. 4 Specifications
Chapter 1 Before Use
1-5
1. 4 Specifications
Subject Specification
Model KIP
C7800
Type Console
Printing method
LED Array Electro Photography
Color CMYK
Photoconductor
Organic Photoconductive Drum
Print speed
Color : 100mm / second max. (4.6ppm / 36”x48”) (4.7ppm / A0)
(for Roll Deck 3)
, speed varies by media type)
Mono : 120mm / second
(xx ppm / 36”x48”) (xx ppm / A0)
Exposure method
Multi-Level (tone number 9) LED Print Head
Resolution
600dpi x 2400dpi
Print width
Maximum : 914mm (36 inches)
Minimum : 297mm (11 inches)
Print length
Maximum :
Minimum : 210mm (8.5 inches)
NOTE : If the print is longer than 6m, KIP does not guarantee
image quality or the reliability of media feeding system.
Plain Paper / Bond
5x Standard
Roll Deck 3
2x Standard
Roll Deck 1, 2
Tracing Paper / Vellum
1x Standard
Film 1x
Standard
Glossy Paper
1x Standard
Warm up time
Shorter than 4 minutes
(At 23 degrees centigrade, 60% RH and 220V)
First print time
Shorter than 33 seconds (36 x 48 inches)
Fusing method
Heat roller fusing
Development
Contact type mono component non-magnetic development system
(Initial toner is unnecessary. One toner cartridge contains 1kg.)
Charging method
Corona
Transfer method
Transfer roller
Media feeding method Automatic (*3 Roll Decks) and manual (**20 cut sheets capacity)
* Image quality on A3, 15”, 12”, 11” width roll media is guaranteed with
using Roll Deck 3 only
** A2 - A4 (24” - 11”) in Portrait orientation only
Input power
220 to 240V (+6% to -10%), 20A and 50/60Hz
Interface
Ethernet 10BASE-T, 100 BASE –TX, 1000 BASE-T
USB 2.0 (5VDC max)
Power consumption
On 230V, 50/60Hz 3.6 kwh (Maximum)
Stand by 0.8 Kwh (Average)
Printing 2.2 Kwh (Average)
Warm up 3.4 Kwh (Average)
Acoustic noise
Less than 65db (Printing)
NOTE : Impact noise such as cutting sound is excluded.
Less than 60db (Stand by)
Ozone
Less than 0.05ppm (Average of 8 hours)
Dimensions
1376mm (Width) x 790mm (Depth) x 1450mm (Height)
Weight About
540kg