Kawai KLCS Manual - Headsets
• To Computer Mic IN 1/8” jack used to send the
students performance to a computer or other line
level input recording device.
• Inst. Level (L & R)sets the volume level of the
headsets, preset at factory and normally does not
need adjustment.
• Phones & Mic connectors for headsets
Headsets
Connect the headsets to the student boxes by inserting
the green colored 1/8” connector into the “Phones” jack
and the pink colored 1/8” connector into the “Mic” jack on
the student box.
Please note: make sure the plugs are fully inserted into
the hole on the student box, if not fully inserted the sound
may be heard from one channel only or not heard at all
from headset.
Testing the Basic System
Once all the connections are made and the keyboards are
labelled for the teacher to identify the student number, it is
a good idea to check that the lab controller is receiving
audio from all the student keyboards and the students can
hear the teacher’s microphone and instrument. It will be
easier to have an assistant help you. Start at keyboard #1
then work through each student instrument connected to
the Lab system and check to verify the the LED will
illuminate corresponding to the correct student number,
then have the assistant wear the student headset, speak
into the student microphone then play the student
keyboard. Adjust the student volumes as necessary.