Kawai KLCS Manual - Chapter 3
Chapter 3
QUICK START
The following section outlines the input and output
connectors, the front panel controls and the front panel
switches. For a more detailed description of how the
controller works, refer to Chapter 4 (OPERATION OF
THE CONTROLLER).
System Connections
The following is a description of what each input or output
connection does and what it should connect to in the lab
system. Not all of the connections are necessary to make
the system operational. For instance, an audio recorder
may not be available to record lab performances or a
small monitoring system may not be available for external
monitoring. However, a CD player may be useful for
reference purposes.
The Classroom HUB
The Hub is the center of your system. All the pieces of
your system connect to this unit. Place the Hub in a
centralized location with access to an electrical outlet.
• Remote – Connection for the Teachers Controller
Module use the supplied RJ-45 cables (8 conductor
telephone type cables), it is not recommended to
extend the cable length over 13 meters as the
cable carries digital information and longer cable
lengths will increase the resistance and can make
the unit function incorrectly.
• Teacher - Connect to “Student Box” from the
teacher’s instrument, use with the supplied RJ-45
cable (8 conductor telephone type cable).
Connect the teacher headset into the jacks on the