Kawasaki VERSYS - Owner's Manual - Note
of
176
MAINTENANCE AND ADJUSTMENT
123
NOTE
○
When inserting the cotter pin, if the
slots in the nut do not align with
the cotter pin hole in the axle shaft,
tighten the nut clockwise up to the
next alignment.
○
It should be within 30 degree.
○
Loosen once and tighten again when
the slot goes past the nearest hole.
A. Turning Clockwise
WARNING
A loose axle nut can lead to an
accident resulting in serious in-
jury or death. Tighten the axle
nut to the proper torque and in-
stall a new cotter pin.
•
Check the rear brake (see Brakes
section).