Kawasaki VERSYS - Owner's Manual - Notice
GENERAL INFORMATION
29
properly. The indicator light also goes
on whenever the troubles occur in
digital fuel injection system (DFI). If
the indicator light goes on, have the
DFI system checked by an authorized
Kawasaki dealer. When the indicator
light flashes, first turn the ignition key
to “OFF” and then back to “ON”.
: The water temperature warning in-
dicator light goes on whenever the wa-
ter temperature rises to about 119°C
(246°F) when the motorcycle is in op-
eration. This warns the operator that
the water temperature is too high. If the
warning indicator light goes on, stop
the engine and check the coolant level
in the reserve tank after the engine
cools down.
NOTICE
Do not let the engine continue
running when the warning indi-
cator light flashes. Prolonged
engine operation will result in
severe damage from overheat-
ing.
(For models equipped with ABS)
: The ABS (Anti-lock Brake Sys-
tem) indicator light goes on when the
ignition switch is turned to “ON” and
goes off shortly after the motorcycle
starts moving. If the ABS is normal, it
stays off. If something is wrong with the
ABS, the indicator goes on and stays
on. When the indicator light is on, the
ABS does not function but if the ABS
fails, the conventional brake system will
still work normally.