Kawasaki VERSYS - Owner's Manual - Notice
148
MAINTENANCE AND ADJUSTMENT
Battery Removal
•
Remove the seat (see Seat section
in the GENERAL INFORMATION
chapter).
•
Slide the red cap.
•
Disconnect the cables from the bat-
tery, first from the (–) terminal and
then the (+) terminal.
A. Red Cap ((+) Terminal)
B. (–) Terminal
•
Take the battery out.
•
Clean the battery using a solution of
baking soda and water. Be sure that
the cable connections are clean.
Battery Installation
•
Place the battery in the rear fender
front.
•
Connect the (+) cable to the (+) ter-
minal, and then connect the (–) cable
to the (–) terminal.
NOTICE
Installing the (–) cable to the (+)
terminal of the battery or the (+)
cable to the (–) terminal of the
battery can seriously damaged
the electrical system.
•
Put a light coat of grease on the ter-
minals to prevent corrosion.
•
Cover the red cap.
•
Reinstall the removed parts.