KDS Models KDS-7XII Instruction Manual - page 24
KDS
KDS
KDS
KDS-
--
-7X
7X
7X
7XII
II
II
II
Radio Control
Radio Control
Radio Control
Radio Control System Manual
System Manual
System Manual
System Manual
- 23 -
frequency of your system, your devices will be out of control. Under these circumstances, you
can try to change the transmitter frequency by following steps:
1. Enter system mode by holding MENU and turning on transmitter
2. Press MENU several times to "ID GEN" function, you can see following screen
3. Press UP or DN to change the option to 'YES'
4. Press + or - to confirm the operation
5. The transmitter will regenerate the frequency and ID, and then the display will show 'OK'
and the transmitter will return to 'NO' status automatically.
Figure 30 – ID GEN menu
Notice:
1. The new frequency is selected randomly. If the interference still exists, you can try to
change it again until the interference disappears.
2. After the frequency changing, please rebind the radio.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
(1)this device may not cause interference,and
(2)this device must accept any interference received,including interference that may cause
undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.